Meidong Hook 5 Claws Suction Cup Wall Mounting Gluing Installation for Smooth Rough Wall Surface Multi-Use Hanging Bag Loofah Sponge Towel Key Coat at Bathroom Kitchen Office Car (White)

Product Feature

 

• Two Ways Installations:Suction cup installation and gluing installation.

 

• Premium Quality:Made of durable Eco-friendly non-toxic plastic. Reusable, non-toxic, odorless and safe to the environment.

 

• Easy to Install and Remove:This sucker hook is not only stick to the wall tightly but also remove easily.

 

• Wide Application:Great for any kinds of surfaces, such as smooth surface or wall surface with concave and convex.

 

How to Install?

 

Suction Cup Installation

(1) Smooth Surface Mounting

 

Installed on smooth and airtight surfaces, such as ceramic tile, glass, plastic surface, metal coating surface, etc.

 

Wipe the wall clean and keep the surface dry, then turn out the torsion cap counter-clockwise;

Put the base of sucker hook vertically close to the wall and press the sucker rotating axis to discharge air, then tighten the torsion cap clockwise;

Wait for 2 hours after hook installation to use.

 

(2) Airtight Rough Surface Mounting

 

Installed on airtight rough surfaces with concave and convex less than 0.04 inch, such as rough tiles, ground glass, etc.

 

Wipe the wall clean and keep the surface dry, then loosen the torsion cap counterclockwise;

Put the base of sucker hook vertically close to the wall, then press the torsion cap tightly with the left hand to exhaust the air. At the same time, tighten the torsion cap clockwise by right hand, so that the sucker is stick to the rough surface;

Wait for 2 hours after hook installation to use.

Note: It is not suitable for air permeable walls (e.g. air permeable slabs, slates, etc.) or wall surface with concave and convex greater than 0.04 inch.

 

 

Gluing Installation

Suitable for installing on marble, fiberboard, wood, ceramic tile, glass, plastic, metal wall or wall surface with concave and convex greater than 0.04 inch.

 

Wipe the wall clean and keep the surface dry;

Rotate counterclockwise, open the torsion cap, take out the suction cup and ready to replace it with the gluing; base;

Apply the free-binding glue to the gluing area of the gluing base;

Put the base vertically to the wall and then press down it tightly;

Let the glued base without any other parts be flat and close to the wall for 24 hours;

After waiting for 24 hours, install the product parts and tighten the torsion cap clockwise.

Note: It is not suitable for unstable wall surfaces such as glue, wallpaper, wallpaper, etc.

 

 

Plz Attention

 

For secondary installation of sucker base, soak in 45℃ warm water for 5 minutes, then dry and reinstall the suction cup.

When the transparent sucker on the hook base is dirty, please clean and dry before using.

After installed the hook, please wait for 2 hours to confirm that it is firm and then use it again.

Do not install the product near the fire source or at high temperature to avoid melt or deform.

Do not hang valuables or items beyond the load range.

Products should not be used for purposes other than specified functions.

The hook is sharp. Please install it where children can't touch it to avoid accidents.

 

Specifications

Material: ABS

Color: White

Load Bearing: 6.6 lb

Item Size: 5.3'' x 2.6''

 

Package Includes:

1 x Hook Main Body

1 x Sucker Base

1 x Gluing Base

1 x Adhesive

Write a review

Your Name:


Your Title：


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: